Launch X431 PAD VII Elite comes with a 13.3 inch large touch screen, full system diagnostic function, powerful service functions and Smartlink diagnosis. Equipped with the 2.0GHz Octa-core optimized chipset, Android 9.0 operating system, 8G memory and 256G large storage memories,X- 31 PAD VII Elite makes your intelligent diagnosis faster than ever.
Launch X431 IMMO Plus key programmer is a new generation of 8-inch automobile special IMMO matching tool with high configuration and super performance. The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor, 4GBRAM+64GBROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stable and more durable.
LAUNCH X431 PRO3S+ V5.0 inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result. Through the simple wireless communication between the tablet and vehicle, it achieves full car model and full system vehicle trouble diagnosis, which include reading DTCs, clearing DTCs, reading data stream, actuation test and special functions.
SmartLink C 2.0 is an upgraded version of HDIII, with hardware upgrade and function upgrade.
Replace Launch X431 V+ and HDIII module.
For 12v and 24v heavy duty trucks
With DBScar VII Bluetooth adapter, Bluetooth version of CRP919E.
Two Years Free Update.
Supports CANFD and DIOP.
Ship From EU to EU No tax.
The LAUNCH X-431 ECU & TCU Programmer supports ECUs data reading & writing quickly, including reading the chip ID and backing up the EEPROM data, backing up the FLASH data, and restoring EEPROM/FLASH data.
2024 Launch X431 V+ 5.0 PRO3 Diagnostic Tool Supports Topology Mapping ECU Online Coding & 37+ Services AutoAuth FCA SGW Add CAN FD Protocols
Support wifi/bluetooth and one click update, make your update job much easier.
Contain 72 car brand from USA, European, Asia and so on.
Ship from US/EU/UK Warehouse, Fast Delivery with Tax Free.
Android 9.0 system, a 8-core 1.8GHz processor and a 1920x1200 IPS HD display screen, providing 4GB RAM memory and 64GB ROM storage which ensures faster and more stable running. 8MP rear & 5MP front camera, 7000 mAh battery,
Bi-directional Control, All system diagnostics, Topology Mapping, VAG Guided Functions, CANFD DOIP, 50+ Services, FCA AutoAuth Access etc.
J2534 ECU Programming + Online Programming + ECU Coding
With Smartlink C2.0 J2534 interface
Launch X431 PRO ELITE is an 8-inch smart car diagnostic device developed based on Android 10.0 system. It adopts 2.0Ghz 4-core high-efficiency processor, 4GB RAM+64GB ROM large storage, and is equipped with a high-endurance battery, which runs faster, more stably and lasts longer.
Two Years Free Update
Supports CANFD and DIOP
31+ Reset Functions
This is Launch renewal card 2 years update service for Launch V/ V+/ X431 Pro Mini/ ProS Mini/ DIAGUN IV/ 5C/ PRO DYNO/ PRO5
You can buy it to extend 2 years subscription.
Update version of Launch X431 V/ Pro Elite/Pros Elite, same function but cheaper.
Supports CAN FD DoIP, FCA Autoauth.
Supports Bi-directional Control, 31 service function, VAG guided function and ECU Coding.
Android 10.0 system, 2.0Ghz 4-core high-efficiency processor, 4GB RAM+64GB ROM, battery 6000mAh, Runs faster, more stably and lasts longer.
Launch MCU3 Adapter works with X-PROG3 as readings of new ECUs TCM, Mercedes all keys lost etc.
It's optional part.
Launch GIII X-Prog 3 Plus MCU3 can be worked together with X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII
X-PROG 3 supports anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
MCU3 adapter for more functions of X-PROG3 programmer as readings of new ECUs TCM, Mercedes all keys lost etc
LAUNCH X431 PAD V ELITE comes with the all-in-one features, Perform ECU Reprogramming, all services functions ,Bidirectional Contral ,ADAS calibration function, TPMS service, and 8 extended modules functions. New Smartlink C VCI powers technicians a new diagnostic level without the limitation of diagnostic functions, tools, and vehicle types.
Launch CRP919 EV is an intelligent and networkable diagnostic tool based on the Android platform, with full system and full functions that best meet the needs of the new energy DIY market. It covers software for more than 120 models. The functions of the product include code reading, code clearing, version information, data stream reading, action test, and coding.
LAUNCH X431 PRO3S+ SmartLink HD is the Upgraded of LAUNCH X431 PRO3S+HDIII.
LAUNCH top scanner X431 PRO3S+ Smartlink HD ranks No.1 in vehicle coverage.
It can work for cars/trucks/buses/trailers/excavators/diesel engine/construction machinery/pick-up, etc.
LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card Compatible with X-431 PRO3 V+ 5.0 \X-431 PRO3(PRO3S+ V5.0)\X-431 PRO3 ACE\X-431 PRO3 APEX
LAUNCH X431 PRO3S+ is a professional diagnostic scan tool that can diagnoses full systems in all vehicle systems on the ECU:read / erase codes, view live data, retrieve ECU version information, do active test and service functions for all systems including ECM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, Fuel System, Light System and A/C system etc.
All system diagnosis + Android 10.0 system +38 reset Functions + ECU Coding + Active Test + CANFD & DOIP Support + DBScar VII VCI
VAG Guided Function + FCA AutoAuth access + 2 year Free update