Item No. | Adapters/Parts | Picture | Quantity | Functions |
1 | VGS2-FCVT Interface Board | ![]() |
1pc | Applicable to connect MB 722.8 (VGS2-FCVT) gearbox |
2 | VGS/VGS2-FDCT Interface Board | ![]() |
1pc | Applicable to connect MB (VGS-FDCT/VGS2-FDCT) dual-clutch gearbox |
3 | VGS2/3-NAG2 Interface Board | ![]() |
1pc | Applicable to connect MB 722.9-2/3 (VGS2-NAG2/ VGS3-NAG2) gearbox |
4 | GND Cable | ![]() |
1pc | Applicable to connect VGS/VGS2-FDCT Interface board and gearbox (for spare) |
Mini ACDP with Yanhua Module16 Benz C Class Gearbox VGS2 NAG2 Refresh Tutorials.
Detail Steps:
Please Confirm whether the gearbox module model is correct.
Step 1. Please prepare ACDP, OBP+ICP adapter,interface board and gearbox.
Step 2. Connect the interface board correctly to the gearbox interface as shown.
Step 3. Short the CAN resistor on the OBP+ICP adapter to the "CAN-R Join".
Step 4. Connect ACDP, OBP+ICP adapter, interface board and gearbox.
After Connection, Open MINI ACDP APP, Choose Benz - Gearbox clone/refresh - C Class- VGS2 NAG2 - Refresh and follow continue steps
Check personalized and activated are YES. That means the gearbox has no been refreshed.
Confirm the system information and click Continue. As the below picture is the system information file storage path.
Choose Automatic calculation erase password and continue to erase data
After Erasing, Click Identify, make sure personalized and activated are No. That means the gearbox data has been erased. Click OK.
Identify system information finish and file backup,Work Done.