This is OBDSTAR P002 Full Package including P002 Adapter, TOYOTA 8A Cable and Ford All Key Lost Cable.
Work with X300 DP, X300 DP Plus and Pro4.
FCA 12+8 Adapter is used for Chrysler's Security Gateway Module (SGM) which limits an aftermarket scan tool to only reading DTCs and viewing data.
With Chrysler 12+8 Adaptor, it allows communication with latest Chrysler, Dodge, Jeep, Fiat & Alfa vehicles till year 2019.
Can be used with Autel Maxisys Series and IM608, OBDSTAR devices like OBDSTAR X300 DP Plus, Launch devices like Launch X431 V etc.
OBDSTAR CANFD Adapter is designed for diagnosing ECU systems of cars meeting with CANFD protocols. It's used with our company's tablets series products such as Key Master DP Plus. It's high performance and easy operation.
LAUNCH X431 CAN FD Connector Car Code Reader
Compatible with: X431 Throttle, Pad II AE, Torque, Turbo, X431 V, X431 V+, X431 ProS, X431 Pro5, X431 Pro3S, PAD V and PAD VII
Can FD Compatible New Cars Vehicles. Such as GM, Ford, AUDI, BMW, BMW MINI, JAGUAR, LAND ROVER etc. (reading fault codes, data streams and other special functions)
Adds Toyota Corolla Cross (2022-), Frontlander (2022-) 4A Proximity (board number 1320 2561) add key and all keys lost
Adds 2022- BZ4X, Granvia, Harrier, Venza, Sienna, Wildlander, Sequoia, Tundra, Land Cruiser 8A-BA type add key and all keys lost without pin code
Xhorse FCA-12+8 Adapter for Jeep Dodge Chrysler Work with VVDI Key Tool Plus
OEM FCA 12+8 UNIVERSAL ADAPTER for OBDSTAR X300 DP Plus/ Autel MaxiSYS /Autel IM608 / Launch X431 V etc
LONSDOR L-JCD Cable L-JCD Patch Cord Suitable for K518ISE
You can program keys for Dodge and Maserati.
Autel 16+32 Gateway Adapter for Nissan Sylphy Key Adding No Need Password
Work with IM608, IM508, Lonsdor K518ISE and Lonsdor K518S
Lonsdor JLR Connector is work with Lonsdor K518 support All key lost programming under Alarm State for 2015-2018 Land Rover & Jaguar.
Xhorse All Key Lost Cable For Ford works with Key Tool Plus Pad, which support all key lost while alarm on, no need to power offover and over again.
Autel CAN FD Adapter is designed to support diagnosis of vehicle models with CAN FD protocol, used on newer GM and Ford vehicles, it can be compatible with all Autel VCI.
OBDSTAR Toyota-30 cable is mainly used for all keys lost and password-free matching operation of 8A-BA and 4A models of Toyota's latest smart key box with 30 pins. The TOYOTA-30 cable supports the following models: 2022-Corolla Sharp, Fenglanda, Senna HV, Lingfang, Lingfang HV, Wei HV, Grevia HV, bZ4X, etc. Using Toyota-30 cable, there is no need to break, hook, or plug and unplug wires during operation, and there is no risk of damaging communication wires!
OBDSTAR FCA 12+8 Cable for Chrysler Work on X300 DP Plus/X300 PRO4/OdoMaster/X200 PRO2
OBDSTAR Nissan 40 Cable is mainly used for proximity key adding and all key lost (no need pincode) for Nissan Hennessy/Kiwi T33/Pathfinder, Mitsubishi Outlander etc
Works together with X300 DP PLUS/ X300 PRO4/ X300 DP Key Master
Lonsdor NISSAN 40PIN-BCM Cable for Nissan X-Trail T33/ Nissan Pathfinder/ Mitsubishi Outlander/ Nissan Sylphy B18 Works with K518ISE K518S
This adapter simply replaces the standard OBD2 Connector on the Xtool tablets' main data cable. No other software or hardware is required, once installed the adapter can be used with existing software and can be interchanged with the standard OBD2 connector.
FCA 12+8 Cable Adapter works for Chrysler, it is a universal cable, connect with XTOOL tablet, like X100PAD, X100PAD2, X100PAD3, EZ400PRO, A80PRO , A80PRO MASTER, D7, D8, D9, D9PRO and so on.
Xhorse Delphi 48 IMMO Box Adapter XDNP48GL for Old Great Wall Cars is used to connect the Xhorse Key Tool Plus tablet and the Xhorse VVDI PROG programmer. This product can read the Delphi IMMO box data on old Great Wall cars, and can be used to add 48-chip keys or do all keys lost matching for the old Great Wall cars
Xhorse MQB48 No Disassembly No Soldering 13 Full Set Adapters XDNPM3GL