John Deere Service Advisor Electronic Data Link (EDL) is the dealer diagnostic PC-to-vehicle interface compatible with Service ADVISOR software. With Service ADVISOR you can view service manuals, use DTAC (Technical Assistance Center) data, make diagnostics, readings, tests and calibrations, re-program controllers.
X-431 V+ heavy-duty module is specifically designed to diagnose diesel and gas-fueled heavy-duty vehicle models of 12V & 24V voltage.
X-431 V+ is a new Android-based vehicle trouble diagnostic device based on android OS. Through the Bluetooth communication between vehicle diagnostic connector and variant mobile intelligent terminals, it achieves full car model and full system vehicle trouble diagnosis, which include Reading DTCs, Clearing DTCs, Reading Data Stream, Actuation Test and Special Functions.
Fcar F502 is a small Heavy Vehicle Code Reader which researched and developed by Fcar. It is with LCD true color display and can support heavy duty truck standard protocols. With high quality and good performance,this code reader can enable vehicle technicians to diagnose heavy duty trucks more easily and quickly.The micro tool is widely used in various maintenance companies, auto manufacturers, repair stations, petrol engine manufacturers and energy-based enterprises etc.
The Incado Diagnostic Kit is a device that enables technicians to perform diagnostics and read /chang parameters on a wide range of handling forklift equipments.
NEXIQ-2 USB Link + Software Diesel Truck Interface and Software with All Installers with Bluetooth
Best solution on market, fully replaces DAF VCI560. DAF VCI lite V1.1 works with all DAF trucks from old to newest EU6, much cheaper and smaller than old VCI560. Best of all, cables and connectors are ECE STANDARD, not customized, so anyone can repair broken cable, no need to buy special repair plugs.
Are you tired of trying to get a handle on all the vehicle data link adapter options available that are costly, unreliable, and serve only particular engine makes and service tool software applications? Cummins INLINE 6 Data Link Adapter. is fully compliant with TMC's RP1210 standard, and has been designed and environmentally tested to Cummins standards to be rugged and reliable.
Xtool EZ500 HD is a high-end and new style auto diagnostic device developed by XTOOL based on Android system. Its open source Android operating system provides fast boot-up and multitasking. EZ500 HD provides extensive vehicle coverage for most US, Asian and European makes, which makes it the best solution for workshops.
MAN VCI Lite is an external diagnosis system with the most extensive test depth for electrical systems in MAN commercial vehicles. This Dealer Level diagnosis system is ideally suited to use in a workshop as well as mobile usage.
Scania Euro6 Adblue Emulator, not need to be leaming, you have to mount emulator in the plug of the EEC(AdBlue)ECU(in the pink one),Yon can find EEC ecu ta the center of the vehicle frame.Two big plugs(one is pink) in this manual you will find pin mumber of the EEC plug,also colours cables of EEC and Emulator.
Fcar F3-G is a color 8 inch TFT LCD touch screen OEM level auto handheld scanner that can test both gasoline and heavy duty trucks in one machine, including all functions of F3-W and F3-D.
Vehicle Support:Domestic, European, United States, Japanese and South Korean Diesel
Built-in high and low speed CAN-BUS,one diagnostic connector can test all the CAN-BUS vehicles. Support almost all OBD-II protocols.
New Original Truck Adblueobd2 Emulator 8-in-1 with Programing Adapter is designed to disable Adblueobd2 system used in trucks, buses and other heavy vehicles with EURO 4 and 5 exhaust emission rates made by Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault and Ford.
ialtest Link Coder Reader For Paccar Peterbilt Kenworth Freightliner Sterling Westernstar International Mack Renault Hino Trucks.It is a good detector, he had read fault codes, sensor data measurement, calibration features ECU.
Truck diagnostic tool T71 works on vehicles which compliance with J1939/J1587/1708 protocol.
It is used in heavy truck and bus
Easy to use with friendly menu interface
Linde Doctor V2014 cable is Dealer service diagnostic tool,
1.works with the LINDE Doctor software which covered all LINDE that with 4 pin and 6 pin forklifts models.
2.It can only run on Win XP system,
3.Software Version: V2014
XTUNER T1 Heavy Duty Trucks Auto Intelligent Diagnostic Tool is new professional Diesel scan tool released by TDINLTEL Tech. Xtuner T1 is with professional design, the hardware features in stability and anti-interference. The built-in over-voltage protection module is able to protect scanner and vehicle against accidental damage during checking.XTUNER T1 support both USB and WIFI connection for the VCI, provide you great convenient in diagnosing Heavy duty trucks. Free update online.
The Bluetooth XTUNER CVD-9 is the China' first commercial vehicle diagnostic adapter based on Android. CVD-9 is an electronic device that connects to the on-board ECU computers of truck, fire engine and motorhome, then transmits information via Bluetooth to the XTUNER CVD application. The CVD-9 adapter works with Class 3 - 8 heavy duty trucks with 9-pin/6-pin Dutch diagnostic port.
VXDIAG VCX HD (VCX Heavy Duty) is designed to meet the industry standard of RP1210A/B, it is PC-to-vehicle interface compatible with multiple software applications, it is available to diagnose most of heavy trucks, Buses, Grabs, Cranes and Engineering Machines for minimizing your investment in multiple brand-specific diagnostic interfaces.
The EMPS3 is Isuzu's state of the art diagnostic tool is used with all current Isuzu electronically controlled engines and to update Isuzu electronic control units
Linde Canbox and Doctor Diagnostic Cable 2 in 1
Latest software version: V2016
Special diagnostic tool for Linde