KZYEE KC10 OBD2 code reader load power 8V-18V, is design to work with all OBD II compliant vehicles(Both diesel and gasoline engine), including those equipped with a CAN bus.Works on most 1996 US-Based, 2003 EU-Based and Asian cars. ( Such as passenger cars,suv,light cars, pick up, mpv after 1996 ).
KZYEE KM20 ignition analyzer can be used to measure each cylinder speed of the car engine, high voltage ignition coil ignition voltage and the injection time of each cylinder. It is induction type, without dismantling any pats, you can test the general distributor type SPW and ignition coil type COP. It can dynamically display the parameters and display the maximum and minimum range.
KZYEE KS11 applies to DOT3, DOT4 and DOT5.1 these three types of brake fluid testing, using the AC pulse testing method, greatly to reduce the polarization phenomenon during the brake fluid testing, the test result is accurate and the measuring speed is fast.
KZYEE KS20 Battery Analyzer has been designed so as to be a car battery tester that is able to test any 12 V or 24 V batteries with a capacity of 100 to 1700CCA. It offers quick and reliable test
and analyze to battery including CCA Value, Voltage, Inner resistance,and battery life percentage. The numerical results are very useful to check your battery condition, avoid any unexpected shutdown
to your battery powered product. Also, it has great compatibility with a wide rang of batteries like AGM,GEL Cell,Flood, Marine Deep Cycle batteries.
This KZYEE KS10 test pen applies to detection of the DOT4 brake fluid performance,indicating the brake fluid condition through five LED lights, using the AC pulse testing method,greatly to reduce the polarization phenomenon during the brake fluid testing, the test result is accurate and the measuring speed is fast.
KZYEE KM10 Power Scan kit is the most revolutionary circuit tester to date, which works off of 12-24 Volt sources, featuring AVOmeter, test light, built -in flashlight, short circuit indicator, relay/component tester, continuity tester and bad ground indicator, the power scan is truly the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician who is looking for a fast and accurate solution to electrical systems diagnostics.