OBD2 ELM327 Bluetooth CAN-BUS Scanner Tool
Top 2 Reason To Get OBD2 ELM327
1. Software Version: 1.5
2. Bluetooth ELM327 Supports All OBD-II Protocols : ISO15765-4 (CAN);ISO14230-4 (KWP2000);ISO9141-2;
1. This one can be only used on windows xp computer, can not used on windows 7 computer.
2.The Bluetooth ELM327 has no cable, it works via bluetooth wirelessly. ELM327 bluetooth one works within 3 meters.
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data, including:
5.Calculated Load Value
7.Fuel System Status
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
13. Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status
Benz 2001/02/03 W203 C200K (ISO)
BMW X5 2002 (ISO) Chevrolet Aveo (ISO)
Citroen C3 2004 (ISO) Daihatsu YRV 2005 (ISO)
Daihatsu YRV Turbo 2006 (ISO)
Fiat Tipo 2002 (ISO)
Ford New Focus 2006(CAN)
Honda Accord 2006 JDM (ISO)
Honda Accord Euro R 2004 JDM (ISO)
Honda City GD8 (ISO)
Honda Civic ES 1.6A (ISO)
Honda Integra Type R DC5 JDM (ISO)
Honda Jazz 1.4M (ISO)
Hyundai Accent 2004 (ISO)
Hyundai Getz 1.3A 2004 (ISO)
Hyundai Getz 1.6M 2004 (ISO)
Hyundai Matrix 2004 (ISO)
Hyundai Santa Fe 2.4A (ISO)
Hyundai Sonata GLS (ISO)
Hyundai Sonata 2005 (ISO)
Hyundai Tuscani FX (ISO)
Kia Carens 2005 (ISO)
Kia Magentis 2005 (ISO)
Kia Rio LS (ISO)
Kia Sorento SUV 2005 (ISO)
Lexus es300 Mazda 2 (CAN)
Mazda 5 (CAN)
Mazda 6 (CAN)
Mazda Premacy 2001 (ISO)
Mazda RX8 (CAN)
Mitsubishi Colt 2003 (ISO)
Mitsubishi Colt Plus 2005 (ISO)
Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000;RS/GS----1994-1996 GS all can do;Turbo Car for the year 1996-2000,only have speed and TPS,can clear the DTCS)
Mitsubishi Lancer Evolution IX 2006 (ISO)
Mitsubishi Pajero 3.5 V6 2006 (ISO)
Nissan Sunny B14 (ISO)
Nissan Sunny VIP FB15 (ISO)
Nissan X-Trail 2.0L 2004 (ISO)
Nissan X-Trail 2.5L 2004 (ISO)
Peugeot 206 2001 –Only can show RPM
Peugeot 206 (ISO)
Peugeot 307 (ISO)
Peugeot 407 (ISO)
Renault Megane II 2005 (ISO)
Renault Kangoo 2006 (ISO)
Subaru Impreza 1.6TS 2002 (ISO)
Subaru Impreza WRX 2005 (ISO)
Toyota Camry 2.0A 2004 (ISO)
Toyota Camry 2.4A 2005 (ISO)
Toyota Corolla Altis 1.6A 2005 (ISO)
Toyota Corolla GLXi G8 1999 (ISO)
Toyota Corolla G9 2002 (ISO)
Toyota Vios 2004 (ISO)
Not Available Veichles:
Mazda 323 Protege 2003 (OBD-I)
Mitsubishi Lancer 1.6M 2006
Nissan Sunny (N16)
Nissan Cefiro (Teana) 2005
Nissan sentra 1.8 2000/2005
Nissan Cefiro (Teana) 2005
Proton Perdana V6
Subaru Legacy GT 2005
Toyota camry 2002
Toyota Wish JDM (Missing Pin 5 in DLC)
Toyota IST JDM (Missing Pin 5 in DLC)
Toyota altis 1.8 2004
Peugeot 206 2000
Suzuki Jimny 1.3 2000
1pc x ELM327 Unit (Bluetooth Version)
1pc x CD Drive
Changing The COM Port Number
With the release of V1.02.07, FTDI has introduced a properties sheet which allows the user to change the
COM port number of a USB serial port.
From DeviceManager, select "View devices by type", then "Ports (COM & LPT)". Select the USB serial port and click Properties. Select the "Port
More details uobd2 customer service will offer you elm327 video teaching you how to use elm327.
Newly Developed Bluetooth ELM327,Supports All OBD-II Protocols As Follows:
Q1: what is the difference for the v1.5 elm327, the plastic elm327 and the bluetooth elm327?
A1:There are the same functions for them,the only different is the interface:the v1.5elm327 has both usb com interface,the plastic elm327 just has usb interface, and the bluetooth elm327 just has no cable ,it works by the bluetooth.
Q2: I found an icon written on elm327 TEST, when I press this button, it says (This soft wear not installed on this version). I want to know is the TEST icon means that it will give me reports about the defects of the car or not. If it gives report I believe that this will be easily for ordinary person.
Please send to me a demo for the TEST soft wear to revise.
Also there is icon named Freeze frame, what does it mean?
A2:yeah, elm327 “TEST” icon is car test function, but why it says “Display mode 5,6,&7 test results(not implemented in this version”, because you did not set elm 327 COM Port. Go to EXIT from elm327 test screen before change the COM Port number, then how to set the COM port, under the elm327 software, there is a file folder named “USB Driver”, open it you will find a PDF file named "ComPort.PDF”, it tells you how to Changing the COM Port Number, the following parts is a short instruction :
Check Customers' Feedback
Q:I know nothing about OBD, but am interested in getting a device to read codes, between me and my brother. I came across this what do you think? Or would any of you lot have an idea what to buy for not much money?
A:Question is - what You want to read. If only something (fault codes only)from engine management system - You can do that with this tool. If You want to read something from other systems - like ABS, Airbag etc. - that tool can't do this. Tool seems good, but I would prefer one with USB lead.For which car You suppose to use it?
Q: thanks for the replies.Basically, we would like one to read the fault codes, and re-set them if possible.We would like one that reads all cars 2003 and younger. I did read that OBD2 was a standard all cars had after a certain year, but I stand to be corrected.I say all cars, at the moment I have a Laguna, and my Bro a Rover 45, but I will be changing mine soon so was after something universal..ish.I saw that item with Bluetooth, because I have an android phone and there are apps to use this with. A USB would be ok too, if I could get software easy enough.
A:For 2003 and newer cars you can use the scan tool you found (elm 327 based i guess). It is limited to engine and a little bit transmission, but can read and clear fault codes for that, but that is true for all cheap universal scanners.For elm based obdII tools there are alot of good pc-software like scanmaster, scanxl, digimoto... I don't know if the android app is good, too. If you want to read codes from other systems (abs, airbag...) then you need other tools, but the universal ones are expensive (launch x431, autoboss...). A good cheap universal tool seems to be the autel maxidiag 70x (obdII and abs/airbag for many cars 'til 2008).
A: Warning, bluetooth interface make many problems (we had diskussion on DK). Better for you is classic cable interface. Latest version ELM327 is v1.4a and work very fine. KKL interface is some limited in ecu scaning. For your scan, read, and clear fault code, is better ELM327v.1.4a. Bay only USB inetface becaus modern laptop havan't rs232.
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.