- OPCOM 2014 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H,Zafira-B. It lets you read and clear fault codes, support many control units.
- Latest firmware version: V1.95
Opcom OP-Com Firmware V1.95 Software 2014V Can OBD2 for OPEL
New OPCOM V1.95 Firmware 2014V Software Features:
1. Software Version: 2014 Firmware Version: 1.95. OPcom V1.95 with new program can work more stable than opcom v1.70 single board and opcom v1.65 dual board.
2. OPCOM is a special PC Based diagnostic interface especially for OPEL.
Never Update It Online, Otherwise It Will Damage The OP-COM !
New OPCOM V1.95 Firmware 2014V Software Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
OPcom V1.95 with new program can work more stable than opcom v1.70 single board and opcom v1.65 dual board.
OPCOM V1.95 Firmware 2014V Software:
Full Fault Code Text Description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
1pc x OP COM Interface
1pc x USB Cable
1pc x Software and Drivers CD
Contact Information:Whatsapp: +86-13995696053
Live Support: Chat with us online
Skype: email@example.comIf you have any problem, please do not hesitate to contact us.Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.
Opcom firmware V1.95 with new program 2014V Vaux-com 120309A is newly verified working more stable than opcom V1.7 & opcom V1.65, and is 2 dollars more expensive.
Attach Opcom firmware V1.95 PCB:
To compare with Opcom firmware V1.7 PCB (single layer):
To compare with Opcom firmware V1.65 PCB (Dual layer):
Compare opcom firmware V1.95, opcom V1.7, opcom 1.65, opcom 1.59 and opcom 1.45
Actually, all versions of opcom mainly differ from each other in the PCB design and the program. The other aspects are the same.
opcom firmware V1.95 is the most expensive. And the lower firmware version, the cheaper the price.
- VAUX-COM Software: the Same
VAUX-COM_120309a is compatible with opcom firmware 1.95, opcom firmware V1.7, opcom 1.65, opcom 1.59 and opcom 1.45.
In another word, all versions of opcom perform the same function: read out and clear fault codes, read live data and perform output test. Also, print out, save, or copy the fault codes to any other application. And measure block information on many control modules & show 8 measuring block parameter simultaneously.
(Crack, No pass, No need to active, No virus)
- Operation system: the Same
XP & windows7
1) dotnetfx35_SP1 patch must be installed on Win 7, otherwise the software will not run properly
2) Open software as Administrator; check the installation video in CD first
- Unable to Update firmware: The Same
opcom crack can’t update online, otherwise it will be damaged.
- Workable Opel models: the same
opcom is compatible with almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
- Workable control units: The same
Works on many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.