Cummins INSITE 8.2 software supplies engine information quickly, getting the inside details you need. No matter what kind of equipment you run, INSITE is the one support product to have in your virtual tool box to fit every Cummins electronic engine.
Cummins INSITE 8.2 Software Lite Version Multi-languages
Cummins INSITE 8.2 Software Compatible with Following hardware:
1.Cummins INLINE 6 Data Link Adapter
2.Cummins INLINE 5 Data Link Adapter
3.DPA5 Dearborn Protocol Adapter 5 Heavy Duty Truck Scanner
4.NEXIQ USB Link
5.XTruck USB Link
6.AUGOCOM H8 Truck Diagnostic Tool
Cummins INSITE 8.2 Language:
Cummins INSITE 8.2 support win7 32
Cummins INSITE 8.2 is offered in four functional levels: Basic, Lite, RSGR and Pro, ranging from a read only access level to full-function access and capability for the service professional.
This is Cummins INSITE 8.2 Lite Version Support 500 times. Software need activation, one activation including 500 times.
Cummins INSITE 8.2 can provide your business with
• Trip and vehicle information
• Parameter and feature adjustment
• Accurate problem diagnosis
• Complete wiring diagram sand sensor location maps
• Step-by-step trouble-shooting information
• Fault tree information
• Fault code and symptom-based diagnostics
• Engine diagnostic tests
• Tools to create templates for a group of vehicles
• Fleet management/driver reward programs(Need purchase separetely)
• Audit trail information
• Enhanced ECM security(Need purchase separetely)
Cummins INSITE 8.2 Functions:
Support SAE J1708/J1587 and J1939/CAN data links
Support USB full speed port at up to 2M baud rate
Support RS-232 PC/PDA serial port at up to 115.2k baud rate
It's fully compliant with TMC's RP1210 standard
Small enough to fit in pocket
Aluminum housing provides ruggedness
Derives 8 V to 50 V DC power from vehicle
Includes advanced processor for maximum speed and performance
Internal Flash memory allows firmware upgradeability
Includes 5 LEDs to indicate power and USB, RS-232, J1708/J1587, and J1939/CAN communications
Rated for -40° to +85° C operating temperature
1pc x Cummins INSITE 8.2 software with one activation
Contact Information:Whatsapp: +86-13995696053
Live Support: Chat with us online
Skype: UOBD2.COM If you have any problem, please do not hesitate to contact us.Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.
Cummins INSITE 184.108.40.206 Software Count Installation Guide
Cummins Insite 8.20 Lite Version Installation--UOBD2
Cummins Insite 8.1 crack is verified to clear fault codes without any issue.
How to clear fault codes on Cummins Insite Pro:
After you connect to the ECM with Insite, click the “Fault Codes” tab on the left.
After the codes are displayed, highlight one of them & right-click on it.
Select “Erase all Faults” and follow the instructions.
You will be asked to turn the key off, and click a button, then key on
How to clear DTCs (check engine light) on Cummins Insite without a code reader:
NOTE: Depending on which flash is on your PCM, there is a chance that this procedure will not work. In that case, it is best to use an OBD-II scanner (e.g. NEXIQ VXTRUCKS V8 USB Link) to clear the codes.
Put the key in the ignition with doors closed.
Cycle the key FIVE times from the OFF position to the RUN position without cranking the engine. Leave in the RUN position on the FIFTH cycle. Note: The RUN position is TWO clicks while the ACCESSORY position is only ONE click.
*Example: KEY IN (OFF) – RUN – OFF – RUN – OFF – RUN – OFF – RUN – OFF – RUN
This will clear any DTCs that are currently active or stored in the PCM.