OPS For BMW Diagnose and Coding Tool Fit All Computers
1. Software Version: SSS V41, DIS V57
2. Supported Language:
SSS Lauguage: English, Deutsch (German), Turkish, French, Spanish, Italian, Portuguese, Greek, Japanese, Korean
DIS Lauguage: English, Chinese, Korean, Russian and German
3. Software Requirements for Computer:
Windows XP professional
Min 2GB free space in C: Partition
Min 1.8 GHz CPU
512 MB memory
Support USB 2.0 function
BMW OPS Specification:
The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.
OPPS has been designed for encoding, individualising and programming ( CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.
BMW OPS Vehicle Coverage
OPS is Intended for Rapid Programming of Control Units.
When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS.
OPS with DIS for Diagnosis Supported Models:
Vehicle interface via OBD-II socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, E85, E86, E38(OBD-II), E39(OBD-II ), E46(OBD-II ), E52, E53, R56, R50, R52, R53
OPS with SSS for Programming Supported Models:
(1) Vehicle interface via OBD-II socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, R56, R50, R52, R53
(2) MOST compatibility ( multichannel programming):
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, R56, R50, R52, R53
1. OPS multiplexer(Orange Head)
2. OBD-II diagnostic cable
3. LAN cable
4. OPS MOST cable
5. Hard disk
Q1: How to update this product?
A1: This product update is through hard disk.You can send the old hard disk back to us and we install the new software in the hard disk and send back to you.You only have to pay the shipping cost for this update.
Q2: What is the difference between OPS and OPPS?
A2: This two product almose the same function.Compared with OPS,the quality of OPPS better.
Q3: Does this BMW OPS support an old models like E36,E34 and E39?
A3: You can download the car model that BMW OPS support from our website.It can works on E36 E34 E39.
Q4: What is the advantage of hard disk fit all computers?
A4: Hard disk is fit all laptops.The advantage is it do not have much demand on laptop,only require your laptop support USB 2.0. But this one software installation need pay a little bit attention.the installation maunal you can download from our website. The version for this hard disk is DIS V57 SSS V39.
Compared with T30 version hard disk,the hard disk fit IBM T30 speed may more fast and stable.We suggest this one to those who have IBM T30.
How To Run BMW OPS and BMW GT1 SSS System
Check “How to run BMW OPS and BMW GT1 SSS system” in the "Related Download Files".
When using BMW GT1,BMW OPS,BMW Mini OPS HDD with IBM T30, how to switch between DIS Diagnostic Device and SSS32 Diagnostic Device?
Reply: DIS Diagnostic Device and SSS V32 Diagnostic Device both run with DOS system.
1) To run DIS Diagnostic Device, it works automatically.
2) To run SSS V32 Diagnostic Device, see the follows:
A) Open IBM T30, then wait for a while, until IBM T30 screen shows “Boot” words: see the photo:
B) Press “space” key. Or any key of “up” “down” “left” “right” is ok!
C) Input “bootos”+ 'space” key+ “3”, then press “enter” key.
D) Then the Following Ccreen Appears.
E) Then the IBM T30 screen becomes black, then white, until the following screen appears. Now it is ready to run SSS32 Diagnostic Device
Attention: sometimes IBM T30 will restart, if it will, repeat the above-mentioned
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up BMW OPS software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our BMW OPS software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
Learn more videos and promotion activities about other products at: