VW AUDI KM TOOL is a KM adjust tool.Works for VW cars such as Golf 5 Passat EOS Caddy Tiguan and Touran. Works for AUDI A3 A8 R8 and TT. It is multi-language.    Product Detail>> Item No.: SM29
Start From: 1

Tacho Pro 2008 is the most sold programming-device for digital speedometers worldwide. The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation. You can serve almost any vehicle with the Tacho Universal.
    Product Detail>> Item No.: SM21
Start From: 1

R270 BMW CAS4 BDM Programmer includes all the features of CAS3 programmer.
Directly read and write chip data quickly and safely, support for the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data, safe and effective.
Version: 1.16    Product Detail>> Item No.: SK46
Start From: 1

The XPROG-m programmer is designed to replace the earlier version of XPROG programmer. XPROG-m programmer is fully upward-compatible hardware with XPROG programmer and have many additional features.

New version release: V5.0    Product Detail>> Item No.: SM11
Start From: 1

Digimaster 2 is mainly used for odometer adjusting, audio decoding, airbag resetting, anti-theft code reading, and ECU memory programming. Update through Internet; Nearly support all kinds of latest vehicles up to 2008.
Newest version V2.83    Product Detail>> Item No.: SM10
Start From: 1

The software together with interface is designed for changing the state of kilometers in engine controllers EDC16 in OPEL cars. Everything takes place through diagnostic plug. OPEL KM TOOL software is enriched in the possibility of changing dashboard in selected models. Set contains interface in professional plug OBD which is at the same time the key for activating the program, original CD with program and controllers.    Product Detail>> Item No.: SM26
Start From: 1

UPA USB Serial Programmer was used to do motorola chip programming.Similar product with UPA USB programmer is XPROG-M programmer.
    Product Detail>> Item No.: SM02
Start From: 1

UPA USB Serial Programmer Single Version Main Unit With One Adapter including the main unit and one adapter. It can read HC08 HC05 EEPROM and so on.    Product Detail>> Item No.: SM02-B
Start From: 1

This repair kit can repair the following troubles: Screen display: Diga update Screen display: RESET No display after powered on No vehicle list, screen display black strip Frequently Halting Screen display both the following: update handheld
The machine cannot read EEPROM    Product Detail>> Item No.: SM28
Start From: 1

This device is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen, Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading!

    Product Detail>> Item No.: SM03
Start From: 1

Communication with PC via a serial port
Easy to use Windows 98/ME/XP software
In-circuit/On-board EEPROM programming
High Speed EEPROM Programming
CONFIG Register Programming
Pin tester in both operation Modes
    Product Detail>> Item No.: SM13
Start From: 1

Motorola 705 Programmer is easy to use DOS, Windows 95 / 98 / NT / 2000 / XP software .Onboard processor Device selection by 4 jumpers 2 color LEDs indicates mode of operation, security condition (check option available without PC) LPT port self-check function on a board 52PLCC PGA socket on a board and additional adaptor for 64QFP device in complete    Product Detail>> Item No.: SM15
Start From: 1

Filter the km synchronization command between the cluster and the EZS module . This is the only way for the correction of w221 and w164 new models    Product Detail>> Item No.: SE17-A
Start From: 1

Tach pro Kit 2.0V Odometer Correction Mileage Tool Fearture:
1. The Tacho Pro software might not work on PC`s that are faster than 233 MHZ.
2. Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside.
3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell    Product Detail>> Item No.: SM23
Start From: 1

The tms370 is the best low cost programmer for ti tms microcontroller development, car radios and car dashboards programming.    Product Detail>> Item No.: SM05
Start From: 1

TMS374 Programmer Support EEPROM programming of TMS374 MCU.It support immo function of DAEWOO,FIAT,KIA,PEUGEOT,RENAULT and so on.
    Product Detail>> Item No.: SM06
Start From: 1

CAS3/912X/9S12X IN CIRCUIT PROGRAMMER, you don't need to remove the micro from the board! You only connect 7 pins will be ok. It connect to PC by USB.    Product Detail>> Item No.: SM24
Start From: 1

CAS3 Adapter for Digimaster II    Product Detail>> Item No.: SP74
Start From: 1

Program Fiat KM via OBD2    Product Detail>> Item No.: SM25
Start From: 1

HC908/HC08 Programmer

Motorola MC68HC908AZ60, MC68HC05H12 Programmer
Flash/EEPROM programmer with security passed
    Product Detail>> Item No.: SM12
Start From: 1