Lexia-3 Citroen/Peugeot Diagnostic PP2000 PPS

Update to latest version: Lexia-3: V46, PP2000: V23                              

PP2000/LEXIA-3 Interface latest version, works for both Citroen and Peugeot!

Compatible Vehicles:

♦ Citroen: C1,C2,C3,C4,C6,C8,C-CROSSER, NEMO, BERLINGO, JUMPY, JUMPER, AX, SAXO,BX and so on. But please pay attention, according to our customer's experience; this item cannot work well at C5 models.

♦ Peugeot: Models most from the year 1995, but it cannot work well with Peugeot 307.

♦ If customer has these two types of cars, please pay attention, check with us first before purchase.

Functions:

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Language:

♦ English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungarian, Greek, Czech

The following diagnostic functions are supported:

♦ Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

♦ Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

♦ Clear fault codes
this function clears all stored fault codes and other diagnostic information.

♦ Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and read all diagnostic fault codes.

♦ Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

♦ Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc...)

♦ Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

Hardware and software requirements

♦ Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

♦ If customer requires, we can prepare ready to work PC.

Package includes: 

 ♦ 1pc x Main unit with extension OBD2 cable
 ♦ 1pc x Long 9pin to USB cable
 ♦ 1pc x Short 9pin to USB cable
 ♦ 1pc x OBD2 cable
 ♦ 1pc x 16pin to Clip Cable
 ♦ 1pc x Instruction for Installation and Activation DVD for PP2000


Lexia-3  PP2000 Package Specification:

Length:29cm

Width: 22cm

Height: 8cm

Weight: 1300g


FAQ: Frequently Asked Question

Q: Is there any new car models which new lexi-3 software can do?

A: Yes, the Lexia-3 V45 Citroen/Peugeot Diagnostic PP2000 V22.14 adds some new cars as follows:
   Peugeot Bipper
   Peugeot Boxer III 
   Peugeot Boxer III minibus
   Citroen Nemo
   Citroen Jumper III
   Citroen Jumper III minibus

Q: hi, where can I get an installation video? Thanks!

A: Hello, friend, you can check this link: http://www.mediafire.com/?ki4vnwrfzhuvva7 

Tips: If you have problems with installation, please contact with our customer service, we will provide video to teach you how to install it.
         Lexia-3 can do more cars using together with S.1279 module of PPS2000 Lexia-3 Citroen Peugeot.